Choosing the right water heater can get to be a hefty job. Yet, when you shortlist the best ones, Bradford White and State heaters are certainly on it. Even though Bradford is more heard on the streets, they might not be worth the applause.
So Bradford White Vs State water heaters, which one is better?
It’s up to you to decide which one is better, as each excels at a particular factor. Bradford White excels in energy saving and warranty. On the other hand, State heaters excel at durability and keeping their prices lower.
The main question is how much Bradford White is losing to State or vice versa on a particular factor. To understand the differences, we have to dive into details. Let’s get started, shall we?
Summary of Bradford White Vs State Heaters
We thought adding a table would be very helpful for you to get a gist of what we are going to talk about. Here it is;
Factors | Winning Elements |
Warranty | Bradford wins for their 4 years warranty |
Durability | State lasts an average of about 12 years due to its high-quality stainless steel and copper |
Price Point | With State heaters, you can save around $100 |
Efficiency | Bradford has a higher BTU rating but due to Hydrojet technology, saves more than State |
Bradford White Vs State Water Heaters
What we will do in this section is divide the factors that you need to consider before choosing the winner. So here they are:
Warranty
Well, if you are a warranty admirer and like to stay relieved after getting a product, you have to go with the Bradford White. They have an amazing warranty plan for you that could end up saving your heater for a whopping 10 years.
The basic warranty plan you get for free with the heater is 6 years and applies to all models. Yes, it includes the tank and the parts themselves. However, you can pay a bit extra to move to the premium plan, which involves a 10 years warranty.
On the other hand, State water heaters only come with a 1-year warranty, and that too only on the parts. Additionally, no labor, installation, or transportation charges are included in this warranty.
Durability
On average, the State heaters last up to 12 mighty years due to their high-quality stainless steel and copper. On the other hand, the average year that Bradford White lasts is 10 years.
Additionally, don’t think any less of the Bradford as they use advanced technology such as Vitraglas Tank Lining for improved durability.
How does this tech help? The Vitraglas Tank Lining is a specially developed and applied enamel liner and coating. And that prevents damaging corrosive substances from reaching the steel of the heater’s tank and other components.
Price Points
When it comes to these two, there is no cheaper one. Both of them have almost the same price.
However, if we have to name one then the State water heater would be the winner. You could certainly save around $100 if you go with the State. Yes, prices vary for different products between different brands. To set up a baseline, you have selected similar products and compared their prices.
For Bradford, you will get a 50-gallon water heater for a price of around $1,100. On the other hand, for the same 50-gallon heater, you would need to spend around $1,000. If you are wondering why they have similar and highly ranged price points, we got you covered here too.
Both Bradford White and State are manufactured and assembled here in the USA. As you already know, manufacturing anything in the USA is way more expensive than in any other country, thus the high price range. Nevertheless, you get quality in exchange for the price.
Efficiency
Efficiency here means how much electricity bill you can save. And that you can check with BTU. In short, BTU stands for British Thermal Unit. The BTU rating of a water heater indicates how much energy is needed to raise the temperature of one pound of water by one degree.
Just like the price point section, we have also selected a baseline for comparison. We have taken the BTU for tankless heaters of these two brands. For Bradford White heaters, the BTU rating is 199,000/hr. In contrast, the State heater’s ratings are 140,000 BTU/hr.
Bradford White’s Technology Is A Game Changer
Well, does it make State heaters the winner here? No, they aren’t the winner. It’s due to the Bradford heaters’ technology that helps them to save more electricity than State. It’s called Bradford White’s Hydrojet Total Performance System.
The Hydrojet technology improves mixing inside the water heater tank by rerouting the flow of incoming water. And the turbulence created by the mixing in the tank makes it possible to heat the water more efficiently.
They don’t need to work that hard for every other pound of water like the first pound. As a result, the water heater uses less energy to convert more water.
Conclusion
Even though Bradford is more heard on the streets, they might not be worth the applause as they both are equally good. Yes, the war of Bradford White vs State water heaters is ever-lasting. They both are great heaters with their individual plus points.
For a quick recap, Bradford is best when it comes to efficiency and warranty. State heaters are best when it comes to price points and durability. Yet, we have to say that the differences are very little. So, ask yourself, do you want durability at a lower price or an efficient heater that comes with a great warranty?
Further Read:
What Are The Differences Between Navien 240A and 240S Water Heater
How to Connect PEX Directly To Electric Water Heater?
Can I Add A Tankless Water Heater To Existing System?