Skip to content
Home >> Shower >> How To Install A New Showerhead? Step By Step Guide

How To Install A New Showerhead? Step By Step Guide

In case you want to replace the showerhead. You can actually do it without spending a lot of money hiring professionals. Here are some easy do-it-yourself projects that will help you install a showerhead successfully.

Showerhead installation requires three simple steps. The first phase is the preinstall phase, in which you will gather all of your tools and select the appropriate showerhead. In the main install phase, you will install your showerhead, and in the final phase, you will troubleshoot it to ensure that it works flawlessly.

The step-by-step instructions are provided, and by following them, you can easily install your showerhead.

How To Install A New Showerhead?

Installing a new showerhead is a labor-intensive process. But with the proper equipment and fundamental knowledge, anyone can complete this task. You must first gather the necessary equipment and the proper showerhead. The operation can begin once everything has been managed.

Before the installation, there are a few tasks to finish, such as turning off the water supply and removing the old showerhead. Apply the plumber tape and attach the new showerhead to complete the installation. Finally, turn on the water supply and inspect for water leaks.

how to install new showerhead

Manage the Necessary Tools and Materials

Here are the tools you will need to manage before you begin installing the showerhead:

  1. Adjustable wrench
  2. Pliers
  3. Screwdriver (if removing the old showerhead is required)
  4. Plumbing tape (pipe thread tape)
  5. Cleaning rags or cloths
  6. Step stool or ladder (if necessary for access to the showerhead)
  7. Bucket (catch any water during the installation process)

Choosing the right showerhead

Whenever you think about replacing the bathroom’s showerhead. There are a few things you should consider before purchasing it. These are the things you should pay attention to.

1. Showerhead types

There are several types of showerheads, including fixed, handheld, rain, 3 position showerheads, and dual showerheads. To make your showering experience more individualized, take into account your preferences and needs.

2. Spray pattern

Try to find showerheads with interchangeable spray settings, such as mist, massage, or rainfall. This enables you to personalize your showering experience.

3. Water Pressure

You should check the bathroom’s water pressure. While some showerheads function best with high-pressure systems, others are better suited to low-pressure ones.

4. Water efficiency

Choose showerheads with low-flow features or those with water-efficiency labels. These help you reduce your water usage and water bills while also preserving the environment without sacrificing your showering experience.

5. Material and Durability

Think about the components that went into making the showerhead. To ensure a longer lifespan for your showerhead, look for robust materials like stainless steel or brass. Because this type of material can withstand frequent use and resist corrosion.

Installing a new showerhead – Step By Step Guide

There are three stages to installing a shower head in a bathroom. We will discuss all of them separately in this section.

A. Preparing for Installation

Here are two things you can do before starting the main operation

1. Gather the necessary tools

To complete the installation, you will require a step stool or ladder, an adjustable wrench, pliers, a screwdriver, plumbing tape, cleaning rags or cloths, and a bucket to catch any spilled water.

2. Turn off the water supply 

To stop any water flow while installing your shower, find the shut-off valve and turn it off. If you cannot locate a specific shower shut-off valve, you should turn off the main water supply.

B. Installing the New Showerhead

Here is how to install a showerhead.

1. Remove the old showerhead (if applicable)

Remove the old showerhead from the shower arm by loosening it with a wrench or pair of pliers. To fully remove it, turn the screw counterclockwise. If necessary, a screwdriver can help you loosen any connections.

2. Clean the shower arm

Wipe down the shower arm with a clean rag or cloth to remove any dirt, debris, or old plumbing tape. Make sure the threads on the shower arm are clear and unobstructed.

3. Apply plumbing tape

Use the plumbing tape to encircle the shower arm’s threads in a clockwise motion. Between the shower arm and the new showerhead, this aids in creating a watertight seal.

4. Attach the new showerhead

Install the new showerhead on the shower arm using the included screws. First, hand-tighten it, and then use an adjustable wrench to turn it snugly. Avoid overtightening, as it could damage the item.

5. Test for leaks

After firmly installing the new showerhead, turn on the water supply and look for any leaks near the connections. Use the wrench or pliers to further tighten the connections if you discover any leaks. Consider using additional plumbing tape if the leaks continue.

C. Troubleshooting Common Issues

After installing your showerhead, follow these instructions to resolve common problems.

  1. Check for obstructions or debris in the new showerhead if your water pressure is low. To clear the flow-affecting sediment, unscrew it and rinse it.
  2. If your showerhead is clogged or spraying unevenly, soak it in a water-vinegar solution to dissolve the mineral buildup. This is causing the problem. Then, reattach after rinsing.
  3. After installation and problem-solving, customize the angle and height of the showerhead to your preferences. If necessary, use a ladder or step stool.


Here are a few questions about installing a new showerhead, along with their answers.

How to replace a shower head arm?

Loosen the connection using pliers or a wrench and remove the old shower head arm. Screw the new arm firmly into the plumbing fixture in the wall to complete the installation.

How to change a showerhead with a ball?

The old shower head can be unscrewed by rotating it counterclockwise. Applying plumbing tape after cleaning the threaded area. Once the ball joint is attached to the new shower head, tighten it down.

How to install a shower head in the wall?

Select a suitable spot on the wall, making sure it is both accessible and the right height. Make a hole with a drill, then put a shower arm pipe inside. Apply plumbing tape, then firmly fasten the shower head to the arm.

Final Words

Hope it’s clear how to install a new showerhead in a few simple steps. To successfully install a showerhead in your bathroom, you must first complete three phases. During the pre-installation phase, you must gather all the necessary materials and then select the appropriate showerhead.

Following this, the main operation will begin with the installation of your showerhead. After the installation is complete, there is post-installation work where you will troubleshoot common issues for future trouble.

The process is simple enough that anyone with the necessary tools and prior knowledge can install it without the assistance of a professional.